Shelf Hardware and Accessories
|
|
|
|
|
|
|
Shelf Hardware and Accessories |
|
Shelf
Supports
|
|||||
 |
PDARTCLIP
(shelf support)
PDART -15/8 (shelf support strip) PDART -30/8 (shelf support strip) Plastic Adjustable Shelving System Shelf strips have barbed edges to press-fit into grooves in the case sides, 13/32" (10mm) wide x 5/32" deep, eliminating any boring of holes. Gluing is optional but no screws are needed. Shelf strips are supplied 8 feet long or cut-to-size on special order. Dart clips are designed to easily secure into holes in the strips and are easily removable to readjust shelf heights. Brown or White. PDART -15/8: 8 feet long, with holes 15mm (19/32") apart. PDART -30/8: 8 feet long with holes 30mm (1-3/16") apart. |
|
P-103/113
O |
 |
 |
P-6538
W
Nylon Shelf HOLD-DOWN 32mm MODULE Fits 5mm diam. hole in 32mm system. May be used one above and one below shelf or one above with P-113 shelf pin below. Locks shelf into place for transport, White nylon. |
|
P-3051
Polyethylene Shelf Support Pin fits 5mm holes in case side. Since pin length is only 5/16" long, it may be introduced on BOTH sides of a 5/8" partition. Bearing surface is 3/8". Brown or White. |
 |
 |
P-170
(smooth shank)
P-171 (fluted shank) Polyethylene Shelf Supports Designed for insertion into 1/4" holes, these plastic supports may be introduced from BOTH sides of a 3/4" thick wall. Supplied in Brown or Crystal Clear. Overall length: 29/32" Shelf area: 1/2" Pin: .232"Dia.x13/32"long |
|
All Copyrights © 2000 reserved : Selby Furniture Hardware Co. Inc.
Site Developed in India by United Informatics (P) Ltd. |