Drawer Slides
|
|
|
|
|
|
|
Drawer Slides |
|
Drawer
Slides
|
|||||
 |
Completely
versatile
Completely balanced Completely controlled Completely concealed Completely smooth and silent |
 |
|
 |
 |
|
Cabinet
member is fastened to sidewall with round head screws. No screws are
used on the drawer! A 6mm hole is drilled into the sidewall and another
in the drawer back. The drawer is the installed effortlessly by fitting
over the frontal pin and the rear bracket. The frontal pin fastens the
drawer for opening and closing while the rear bracket prevents tipping.
Installing or removing the drawer is just a matter of seconds.
The slides are equipped with the automatic adapter pin .When AUTOMATIC SELF-CLOSING is desired, the optional AUTOMATOR, is snapped into place under the draw slide and an AUTOMATIC SELF-CLOSING SLIDE is in operation! The drawer will close and stay closed even after a rough shove! |
|
|
Low
in price. Surprisingly economical! |
No
steel ball bearings! No noise! Tucked out of sight underneath drawer Movement controlled horizontally and vertically with 40 nylon rollers Normal sliding or automatic self-closing |
| Install front of slide 1/2" from edge and place screw in the second in the second hole (this is automatically 37mm from the front edge. Rear holes fall automatically into 32mm.) segments if 32mm boring machines are used! | |
|
Drawer
Length
|
Model
No.
|
Cabinet
Member
|
Drawer
Member
|
"A"
Boring Distance
|
Drawer
Extends
|
|
300mm
(11-7/8")
|
D-765530/12
|
204mm(8")
|
297mm(11-3/4")
|
272mm(10-3/4")
|
235mm(9-1/4")
|
|
350mm
(13-3/4")
|
D-765535/14
|
236mm(9-1/4")
|
347mm(13-5/8")
|
322mm(12-5/8")
|
285mm(11-1/4")
|
|
400mm
(15-3/4")
|
D-765540/16
|
267mm(10-1/2")
|
397mm(15-5/8")
|
372mm(14-5/8")
|
315mm(12-3/8")
|
|
450mm
(17-3/4")
|
D-765545/18
|
300mm(11-7/8")
|
447mm(17-5/8")
|
422mm(16-5/8")
|
365mm(14-3/8")
|
|
500mm
(19-3/4")
|
D-765550/20
|
332mm(13")
|
497mm(19-9/16")
|
473mm(18-5/8")
|
394mm(15-1/2")
|
|
550mm
(21-5/8")
|
D-765555/22
|
364mm(14-3/8")
|
547mm(21-1/2")
|
522mm(20-9/16")
|
444mm(17-1/2")
|
|
600mm
(23-5/8")
|
D-765560/24
|
364mm(14-3/8")
|
597mm(23-1/2")
|
572mm(22-1/2")
|
490mm(19-1/4")
|
|
"A"
Boring distance=distance from 6mm hole in front
of drawer side to rear of drawer |
|
"Automator"(Optional) |
 |
|
|
All Copyrights © 2000 reserved : Selby Furniture Hardware Co. Inc.
Site Developed in India by United Informatics (P) Ltd. |